Profile Finder

Search the profile library - by code, name, or where it goes.

All Series Family

2000 Series

3000 Series

6000 Series

7000 Series

8000 Series

9000 Series

All Series

2001

2002

2003

2005

2006

2007

2008

3006

All positions

Head

Sill

Jamb

Mullion

Transom

Bead

Corner

Add-on

PM757 section

PM75767 × 45 mm

Horizontal top member whose glazing pocket faces down so the glass slots up into it and a bead clamps it. Used in: Head.

PM758 section

PM75867 × 45 mm

Frame (sill / transom / 45mm head)

The base frame member used as the sill, the transom frame, and the 45mm multi-row head frame; takes the PM759 bead (PM758+PM759 reads like PM757). Used in: Head, Sill, Transom.

PM748 section

PM74867 × 30 mm

Vertical side member (left + right, mirrored) running the full 67mm frame depth into the reveal. Used in: Jamb.

PM762 section

PM76252.7 × 67 mm

Vertical intermediate member between panels; the male half that clamps into the female mullion (with a PM020 V-seal). Used in: Mullion.

PM761 section

PM76128 × 67 mm

Mullion (female)

Vertical intermediate member between panels; the female half that the male mullion snaps into. Used in: Mullion.

PM763 section

PM76367 × 45 mm

Hollow box section used as the divider between stacked rows in the 45mm build. Used in: Transom.

PM759 section

PM75931 × 30.5 mm

Clips into the PM758/PM757 pocket after the glass is in to clamp the pane against the rubber wedges. Used in: Bead.

PM764 section

PM76426.9 × 15.6 mm

DG pocket filler

Fills the glazing pocket where there is no glass (double-glazing pocket filler). Used in: Add-on.

See add-on in 3D →

PM760 section

PM76067 × 27.7 mm

Transom adaptor

The lower piece of the 64/65mm 3-piece transom; pairs with PM758 + PM759 to form the divider between stacked rows. Used in: Transom, Add-on.

PM395 section

PM39545.6 × 27 mm

Reveal/packing adapter that appears in the 45mm head detail and snaps onto the head or jamb. Used in: Head, Jamb, Add-on.

PM387 section

PM38775 x 75 mm

90° corner coupler — a hollow section (inner + outer walls) that snaps onto the jamb to make corner / angle windows. Used in: Corner.

See add-on in 3D →

PM765 section

PM76526.9 × 35.6 mm

Awning sash adapter

Awning sash adaptor — snaps into the glazing pocket in the place a sash would sit. Used in: Add-on.

See add-on in 3D →

PM100 section

PM100100 × 45 mm

Main 100 × 45 frame section; the glass sits in the centre pocket and a PM103 bead clamps it. Used in: Head T1 (subhead) - opt 1, Transom T2 (brick), Left jamb T1 (subhead), Right jamb T1 (subhead), Mullion T2 (brick).

PM167 section

PM167100 × 45 mm

Light weight frame

Used in: Head T1 (subhead) - opt 2, Left jamb T1 - opt 2, Right jamb T1 - opt 2.

PM102 section

PM102100 × 45 mm

Used in: Head T2 (brick) - opt 1, Sill T1 (subhead) - opt 1, Sill T2 (brick) - opt 1, Transom T1 - opt 1.

PM115 section

PM11580 × 40 mm

100mm reveal adaptor

Used in: Head T2 (brick) - opt 1, Sill T2 (brick) - opt 1.

PM103 section

PM10341 × 26 mm

Clips into the centre pocket after the glass is in, clamping the pane against the wedges. Used in: Head T2 (brick) - opt 1, Head T2 (brick) - opt 2, Sill T1 (subhead) - opt 1, Sill T1 (subhead) - opt 2, Sill T2 (brick) - opt 1, Sill T2 (brick) - opt 2, Transom T1 - opt 1.

See add-on in 3D →

PM113 section

PM113100 × 64 mm

Used in: Head T2 (brick) - opt 2.

PM168 section

PM168100 × 45 mm

Light weight sill

Used in: Sill T1 (subhead) - opt 2.

PM133 section

PM133100 × 64 mm

L/W reveal sill testing

Used in: Sill T2 (brick) - opt 2.

PM110 section

PM11080 × 20 mm

Glazing adaptor

Used in: Transom T1 - opt 1, Transom T2 (brick), Mullion T2 (brick).

PM131 section

PM13164 × 100 mm

L/W reveal frame

Used in: Left jamb T2 (brick), Right jamb T2 (brick).

PM108 section

PM10842 × 100 mm

Vertical member between panels — the male half that clamps into the female mullion. Used in: Mullion T1 (subhead).

PM107 section

PM10722 × 100 mm

Vertical member between panels — the female half that the male mullion snaps into. Used in: Mullion T1 (subhead).

PM118 section

PM118100 × 100 mm

Corner post (100x100, 90 deg)

90° corner post — a hollow 100 × 100 section that joins two frames to make corner / angle windows. Used in: Corner coupler.

See add-on in 3D →

PM234 section

PM234100.0 x 45.0 mm

Main 100 x 45 double-glazing centre-pocket frame: the T1 head (detail 24), all jambs (details 30/32 + the three 'PM 234 | JAMB' fixing details), the T2 transom (detail 28, with PM236) and the T2 mullion (upper plan strip, with PM236). The series comparison legend reads 'PM234 100mm x 45mm DG CP FRAME' (7108.2,2073.9).

PM235 section

PM235100.0 x 45.0 mm

Sill and transom profile; takes the PM237 bead. Used as the sill in details 26/29, the T1 transom in detail 25 (with PM236 + PM237), and inverted as the T2 head in detail 27 (with PM237 + PM115).

PM236 section

PM23680.0 x 17.0 mm

Glazing adaptor

Snap-in glazing adaptor that closes the open side of a frame profile used as a transom (details 25/28) or mullion (upper plan strip); callout 'ADAPTOR' at (4462.9,624.2), (4525.8,624.2), (4446.5,529.1).

PM237 section

PM23734.0 x 29.0 mm

Glazing bead (DG)

Clips into the 32mm centre pocket to clamp the double-glazed unit; called out 'BEAD' in details 25 (4431.3,643.7), 26 (4431.3,607.9), 27 (4494.2,665.4), 29 (4494.2,607.9) and both fixing-detail columns.

PM238 section

PM23842.5 x 100.0 mm

Vertical divider between panels - the male half that snaps into the PM239 female half; callout 'PM238/MALE MULLION' (4439.2,498.1) on the lower plan strip.

PM239 section

PM23922.5 x 100.0 mm

Vertical divider between panels - the female half that the PM238 male mullion snaps into; callout 'PM239/FEMALE MULLION' (4446.8,468.1) on the lower plan strip.

PM256 section

PM25636.0 x 15.55 mm

DG pocket filler

DG pocket filler. Fills the DG pocket where there is no glass (die PMH50385). Note: catalogue prints L/W 0.254 (page C01) vs 0.251 (page E02) — kept 0.254, to confirm; glazing matrix to confirm.

PM139 section

PM139113.0 x 45.0 mm

100mm standard sub head

100mm standard sub head fixed above the PM234 head in install option 1; callout 'PM139/SUB HEAD' (4463.7,692.8) in detail 24. Install accessory (kept out of the BOM, mirroring the 2002 subhead convention).

PM145 section

PM145121.44 x 58.0 mm

100mm frame standard sub sill (slotted)

100mm standard slotted sub sill under the PM235 sill in install option 1; callout 'PM145/SUB SILL' (4447.3,583.2) in detail 26; drainage slots noted 'Slotted 25mm x 5mm @ 400mm C/L' (13527.7,668.9). Install accessory (kept out of the BOM).

PM331 section

PM33135.94 x 34.15 mm

35mm awning adaptor

35mm awning adaptor — adapts the PM234 DG frame to a 35 mm awning sash (awning builds only; printed on catalogue page C01).

PM845 section

PM845100.0 × 50.0 mm

Main 100 x 50mm front glazed frame; head + jambs. 18mm front glazing pocket.

PM846 section

PM846100.0 × 50.0 mm

100mm FG SILL / TRANSOM - INTERNAL GLAZED

Internal glazed sill/transom section; takes PM261 bead.

PM847 section

PM847100.0 × 50.0 mm

100mm FG SILL / TRANSOM - EXTERNAL GLAZED

External glazed sill/transom section; takes PM291 bead.

PM848 section

PM848100.0 × 50.0 mm

100mm FG BOX TRANSOM

Hollow box transom. Bead pairing to confirm (not in D04 details).

PM849 section

PM84957.0 × 100.0 mm

100mm FG MALE MULLION

Male half of the standard mullion; mates with PM850.

PM850 section

PM85030.0 × 100.0 mm

100mm FG FEMALE MULLION

Female half of standard and HD mullions; mates with PM849 or PM851.

PM851 section

PM85157.0 × 100.0 mm

100mm FG HD MALE MULLION

Heavy-duty male mullion; mates with PM850.

PM261 section

PM26169.0 × 30.52 mm

SG INTERNAL GLAZED BEAD

Single-glazing bead for PM846 internal glazed sill/transom.

PM291 section

PM29116.25 × 27.8 mm

FG EXTERNAL BEAD

External glazing bead for PM847 (2005) / PM272 (2006).

PM114 section

PM11421.3 × 79.5 mm

100mm FRAME COUPLER

Couples 100mm frames ("Suits All 100mm PM Sections" per 2002 page B0x instance).

PM105 section

PM10580.0 × 8.35 mm

100mm FLAT INFILL

Flat infill panel section for 100mm frames.

PM116 section

PM11621.9 × 15.647 mm

Fills the 18mm glazing pocket when unused.

PM853 section

PM853150.0 × 50.0 mm

Main 150 x 50mm front glazed frame; head + both jambs. 18mm front pocket, 26mm upstand (dims printed on E02). Wedge-glazed directly (no SG adaptor).

PM854 section

PM854150.0 × 50.0 mm

150mm FG SILL / TRANSOM - INTERNAL GLAZED

Internal glazed sill/transom (hollow box + 18mm pocket, 15mm upstand); takes the PM319 SG bead.

PM855 section

PM855150.0 × 50.0 mm

150mm FG SILL / TRANSOM - EXTERNAL GLAZED

External glazed sill/transom (hollow box, sloped web, 18mm pocket); takes the PM291 external bead. Replaces the old non-stocked PM272 - the external build is now fully drawable.

PM856 section

PM856150.0 × 50.0 mm

150mm FG BOX TRANSOM

TO CONFIRM - box transom printed on the profile page but NOT drawn in any E04 assembly detail (details 9-17); intended use/member pairing unstated in section E.

PM857 section

PM85757.0 × 150.0 mm

150mm FG MALE MULLION

Male mating mullion; snaps into PM860. Drawn 30mm wide x 150mm deep on E03; pair width printed 60mm on E04 detail 16.

PM860 section

PM86030.0 × 150.0 mm

150mm FG FEMALE MULLION

Female mating mullion; mates with PM857 (standard) or PM861 (heavy duty). 30mm wide x 150mm deep.

PM861 section

PM86157.0 × 150.0 mm

150mm FG HD MALE MULLION

Heavy-duty male mating mullion (5mm wall printed on E03); mates with PM860. To confirm: no strength chart for the new mullions in the JULY edition (p114/115 still chart PM276/PM275/PM292/PM293).

PM319 section

PM319119.0 × 30.51 mm

SG INTERNAL GLAZED BEAD

Single-glazing internal bead, suits up to 18mm glazing. Die ref PMH51086.

PM299 section

PM299163.0 × 50.0 mm

One-piece 150mm sub head.

PM300 section

PM300163.0 × 55.0 mm

150mm 2 PART SUB FRAME BASE

Base of the 2-part sub head / sub jamb (with PM141 bead).

PM141 section

PM14139.5 × 50.7 mm

2 PART SUB FRAME BEAD

Bead of the 2-part sub frame (with PM300).

PM296 section

PM296171.431 × 57.989 mm

150mm STANDARD SUB SILL

Standard 150mm sub sill (internal-glazed sill detail).

PM302 section

PM302159.0 × 40.0 mm

Larger 150mm sub sill (external-glazed sill detail).

PM308 section

PM308130.0 × 10.493 mm

150mm FLAT INFILL

Flat infill panel section for the 150mm frame.

ME2-20222 section

ME2-20222101.6 x 44.4 mm

101.6 x 44.4 main frame; head / jamb / transom / mullion carrier. Glass sits in the 14.4mm centre pocket.

ME2-20223 section

ME2-20223101.6 x 25.4 mm

25.4mm-deep frame; drawn as the JAMB in typical elevation details 51/53.

ME2-20224 section

ME2-20224101.6 x 44.4 mm

Sill and transom section; also drawn as the beaded HEAD variant. Takes ME2-20225 bead.

ME2-20225 section

ME2-2022543.5 x 22.1 mm

Snap-in glazing bead for ME2-20224 (index page calls it BEAD).

ME2-20226 section

ME2-2022690.8 x 23.0 mm

GLAZING ADAPTOR

Glazing adaptor; closes the pocket under transoms / on mullions and the 3-way corner post.

ME2-50848 section

ME2-50848101.6 x 44.5 mm

LIGHT WEIGHT FRAME

Light-weight alternative to ME2-20222; catalogue marks it ALTERNATIVE on the head and jamb details.

ME2-20234 section

ME2-2023441.6 x 101.6 mm

STANDARD SELF MATING MULLION

Standard self-mating mullion; the elevation detail draws TWO ME2-20234 halves mated as one mullion.

ME2-20229 section

ME2-202296.4 x 90.8 mm

Flat infill (index: FLAT INFILL); closes the unused pocket, drawn on the 3-way corner post assembly.

ME2-20230 section

ME2-2023018.6 x 18.8 mm

Fills the empty glazing pocket. Add-on; not drawn in the window elevation details.

ME2-20239 section

ME2-2023996.0 x 31.5 mm

101.6mm FRAME to 100mm FRAME COUPLER

Couples the 101.6mm ME2 frame to the 100mm PM frame (F01 index: 101.6mm ME2 FRAME to 100mm PM FRAME COUPLER). Also listed in the 2008 G01 index.

ME2-20228 section

ME2-20228101.6 x 101.6 mm

3 WAY CORNER POST

101.6 x 101.6 three-way corner post; drawn assembled with 2x ME2-20226 + ME2-20229.

ME2-20235 section

ME2-2023541.7 x 101.6 mm

HEAVY DUTY SELF MATING MULLION

Heavy-duty self-mating mullion, listed as the ALTERNATIVE to ME2-20234 on the elevation (label MULLIONS). Not drawn assembled - pairing to confirm.

ME2-20243 section

ME2-2024390.8 x 41.4 mm

Reveal adaptor, marked NON STOCKED ITEM on its section card.

ME2-52097 section

ME2-52097101.6 x 50.0 mm

101.6 x 50 double-glaze frame; head / jamb / transom / mullion carrier. Glass sits in the 33mm centre pocket.

ME2-52098 section

ME2-52098101.6 x 50.0 mm

DG sill and transom section; also drawn as the beaded HEAD variant. Takes ME2-52099 bead.

ME2-52099 section

ME2-5209934.2 x 26.2 mm

Snap-in glazing bead for ME2-52098.

ME2-52100 section

ME2-5210090.6 x 21.0 mm

DG GLAZING ADAPTOR

DG glazing adaptor; closes the pocket under transoms and on the frame-as-mullion.

ME2-52101 section

ME2-5210146.0 x 101.6 mm

DG MALE MULLION

Male half of the DG mullion; drawn mated with ME2-52102 in elevation detail 63.

ME2-52102 section

ME2-5210224.5 x 101.6 mm

DG FEMALE MULLION

Female half of the DG mullion; drawn mated with ME2-52101 in elevation detail 63.

ME2-52103 section

ME2-5210337.8 x 8.1 mm

DG POCKET FILLER

Fills the empty DG glazing pocket. Add-on; not drawn in the window elevation details.

ME2-52105 section

ME2-5210537.8 x 28.1 mm

DG 35mm AWNING SASH ADAPTOR

DG 35mm awning sash adaptor; the sash matrix pairs ME2-52097 with ME2-52105 and the PM127/PM128 35mm sash system.